Currently viewing No image
Fujitsu
Fujitsu 15.5kW High Static Ducted Reverse Cycle Air Conditioner
Cooling15.5kW
Heating18.0kW
Room size190-290 m2
Indoor noise36-45 dB
Warranty5 years
The Fujitsu ARTH60KHTA is a 15.5kW high static ducted reverse cycle air conditioner suited to large Australian homes, with an estimated total floor area coverage of approximately 190 to 290 m2. Paired with the AOTH60KBTA outdoor unit on a standard single-phase 230V supply, it provides whole-home cooling and heating through ceiling-mounted ducts with zone control support.
Inverter-driven and using R32 refrigerant, the ARTH60KHTA operates in cooling mode up to 50°C ambient and in heating mode down to -15°C. This model supports static pressure up to 260 Pa — among the highest in the single-phase High Static range — allowing for extensive duct layouts with multiple zone branches.
Final sizing should be confirmed through an on-site assessment, as insulation, ceiling height, glazing, sun exposure and room layout can all affect the right unit choice.
Overview of Fujitsu 15.5kW High Static Ducted Reverse Cycle Air Conditioner
▾The ARTH60KHTA is the highest-capacity single-phase model in Fujitsu’s High Static ducted range, delivering 15.5kW of rated cooling and 18.0kW of rated heating in a reverse cycle system for year-round whole-home comfort. The indoor unit installs in the ceiling cavity and the AOTH60KBTA outdoor unit is mounted externally.
Air is distributed through field-supplied branch ducts and zone control directs airflow to specific rooms or areas. The system’s 260 Pa maximum static pressure capability makes it suitable for larger homes with more complex duct runs.
Zone control for room-by-room airflow management.
Inverter compressor for variable-capacity operation and stable temperatures.
R32 refrigerant — approximately 67% lower global warming potential than R410A.
High static pressure up to 260 Pa for extensive duct layouts in larger homes.
Economy mode for reduced energy draw during light-load periods.
Auto changeover between heating and cooling modes.
Ambient cooling operation up to 50°C.
Optional WiFi control via UTY-ANY2 anywAiR module (not included standard).
Is the Fujitsu 15.5kW High Static Ducted Reverse Cycle Air Conditioner right for your home?
▾The ARTH60KHTA is estimated to suit homes with a total floor area of approximately 190 to 290 m2, making it suitable for large Australian homes with four to six bedrooms. Actual coverage depends on insulation, ceiling height, glazing, sun exposure, number of zones and duct layout.
The 260 Pa maximum static pressure rating allows this unit to serve homes with longer duct runs or more zone branches than lower-capacity models in the same range.
Performance & Efficiency
▾Cooling Capacity
15.5 kW
Heating Capacity
18 kW
Recommended Room
190–290 m²
Inverter
Yes
YesEER
3.14
COP (Heating)
3.68
Star ratings shown for average Australian climate zone (GEMS). Unit operates to 50°C ambient in cooling mode.
Noise Levels
▾Indoor Min
36 dB(A)
Indoor Max
45 dB(A)
Outdoor
53 dB(A)
Indoor noise is sound pressure dB(A) varying by fan speed. Outdoor noise is sound pressure at 1m in cooling mode; heating mode outdoor noise approximately 55 dB(A).
Power & Installation
▾Power Supply
240V Single Phase
Max Power Input
4.94 kW
Max Current
21.7 A
Max Pipe Length
50 m
Max Pipe Height
30 m
Pairs with AOTH60KBTA outdoor unit. Maximum pipe run 50m (factory precharged to 30m; field refrigerant charge required beyond 30m). High static pressure range up to 260 Pa.
Refrigerant & Environment
▾Refrigerant
R32
R32 has approximately 67% lower global warming potential than R410A.
Dimensions & Weight
▾Indoor (W×H×D)
1250 × 425 × 490 mm
Outdoor (W×H×D)
970 × 1418 × 370 mm
Warranty
▾Warranty period
5years
5-year parts and labour residential warranty. Requires licensed installation and registration with Fujitsu General Australia.
Model Details
▾Model NameHigh Static
Model NumberARTH60KHTA
Indoor UnitARTH60KHTA
Outdoor UnitAOTH60KBTA
Features
▾Eco Mode
Zoning
Quiet Mode
Energy Efficiency & Performance
▾The ARTH60KHTA achieves an EER of 3.14 kW/kW in cooling and a COP of 3.68 kW/kW in heating under rated conditions. It carries a 2.5-star cooling and 2.0-star heating energy rating under average Australian climate zone conditions.
The inverter compressor adjusts output to match actual load. Maximum rated power input is 4.94 kW and maximum running current is 21.7 A, requiring appropriate circuit design.
Installation Notes for the Fujitsu 15.5kW High Static Ducted Reverse Cycle Air Conditioner
▾This system pairs the ARTH60KHTA indoor unit with the AOTH60KBTA outdoor unit.
Published installation details include maximum pipe length of 50m, maximum height difference of 30m, power supply: 240v_single_phase.
Pairs with AOTH60KBTA outdoor unit. Maximum pipe run 50m (factory precharged to 30m; field refrigerant charge required beyond 30m). High static pressure range up to 260 Pa.
A site assessment should confirm unit placement, pipe route, drainage, electrical requirements and final room sizing before installation.
Warranty Information
▾This unit has a 5-year warranty, based on the warranty information recorded for this model.
5-year parts and labour residential warranty. Requires licensed installation and registration with Fujitsu General Australia.
Warranty coverage depends on correct installation, normal use, maintenance requirements and the manufacturer’s current warranty terms.
Frequently Asked Questions
▾What size home does the Fujitsu ARTH60KHTA suit?
The ARTH60KHTA is a 15.5kW high static ducted system estimated to suit homes from approximately 190 to 290 m2, depending on insulation, ceiling height, glazing, sun exposure and the number of zones. A licensed installer should assess your home before confirming suitability.
Is this a reverse cycle air conditioner?
Yes. The ARTH60KHTA provides both whole-home ducted cooling and heating for year-round comfort.
Does this unit require professional installation?
Yes. Ducted air conditioning must be designed and installed by a licensed refrigeration and air conditioning installer in accordance with the manufacturer's specifications.
What is the warranty on this unit?
The ARTH60KHTA includes a 5-year parts and labour warranty for residential installations with Fujitsu General Australia, subject to licensed installation and timely warranty registration.
What refrigerant does this unit use?
The ARTH60KHTA uses R32 refrigerant, which has approximately 67% lower global warming potential than the older R410A refrigerant.
Is WiFi or app control available?
WiFi control is available as an optional add-on via the UTY-ANY2 anywAiR module. It is not included as standard.