The Daikin FTXM95WVMA is a 9.5kW wall-mounted split system — the largest single wall unit Daikin offers in this range, with built-in Wi-Fi and enough output to condition a full open-plan level.
Coalfields Climate Control supplies and installs these across Singleton and the Hunter Valley. At this capacity we will always price a ducted alternative alongside it, because for most homes that is the better answer.
Overview of Daikin XL Premium 9.5kW Reverse Cycle Split System (FTXM95WVMA)
▾The FTXM95WVMA pairs with the RXM95WVMA outdoor unit for 9.5kW rated cooling and 10.3kW rated heating, modulating from 2.0kW to 11.2kW in cooling. Airflow reaches 410 l/s in cooling — the throw needed to move conditioned air across a large room.
It shares the FTXM85WVMA’s physical package: 329 x 1240 x 278 mm indoor at 19kg, 990 x 940 x 320 mm outdoor at 77kg, 30m pipe and 20m height limits. So the wall space and outdoor footprint requirements are identical to the 8.5kW model — the extra kilowatt of capacity is free in siting terms, which is worth knowing if you are choosing between the two.
Wi-Fi is built in. Intelligent Eye presence sensing, 3-D airflow and air purification are all standard.
– Largest wall-mounted capacity in the range at 9.5kW cooling, 10.3kW heating
– Wi-Fi built into the indoor unit — no adaptor required
– 410 l/s cooling airflow for throw across large open spaces
– Same physical footprint as the 8.5kW model
– Intelligent Eye presence sensing and 3-D airflow
– Air purification filtration
– R32 refrigerant
– 5-year parts and labour warranty when professionally installed
Is the Daikin XL Premium 9.5kW Reverse Cycle Split System (FTXM95WVMA) right for your home?
▾– Very large open-plan living areas between approximately 60 and 80 m2 with high heat load
– Full levels of split-level or two-storey homes
– Commercial spaces — retail floors, gyms, workshops, large offices
– Rooms with cathedral ceilings where air volume is much greater than floor area suggests
– Situations where ducting genuinely cannot be installed
A single wall unit at this capacity conditions the space it can see. If your floor plan has rooms off the main area, they will not be served well no matter how much capacity you install. That is a layout problem, not a capacity problem, and ducted solves it.
Performance & Efficiency
▾ZERL stars: cooling 3.5/3/3, heating 2.5/2/1.5 (hot/average/cold). Capacity range 2.0-11.2kW cooling, 1.9-12.0kW heating. Airflow 410 l/s cooling, 425 l/s heating.
Noise Levels
▾Indoor: 36 dB(A) silent / 51 dB(A) high cooling; 33 dB(A) silent / 51 dB(A) high heating. Outdoor: 51-54 dB(A) cooling; 51-55 dB(A) heating.
Power & Installation
▾Refrigerant & Environment
▾R32 has a substantially lower global warming potential than R410A. Charge weight not published by the manufacturer.
Dimensions & Weight
▾Warranty
▾Model Details
▾Features
▾Energy Efficiency & Performance
▾The FTXM95WVMA is rated at 3.39 EER cooling and 3.32 COP heating, with annual figures of 3.37 AEER and 3.31 ACOP. ZERL ratings are 3.5 stars cooling and 2.5 stars heating in the hot zone, dropping to 1.5 stars heating in the cold zone.
Rated input is 2.80kW cooling and 3.10kW heating. That is a significant continuous load — comparable to running an electric oven flat out — and it needs to be considered against your switchboard capacity and, if you have solar, against what your system actually generates on a hot afternoon.
This is the lowest-efficiency unit across all the Daikin models we list. It exists to solve a specific problem: a very large space that cannot be ducted. If ducting is possible, the efficiency and comfort case for it at this capacity is strong.
Installation Notes for the Daikin XL Premium 9.5kW Reverse Cycle Split System (FTXM95WVMA)
▾This system pairs the FTXM95WVMA indoor unit with the RXM95WVMA outdoor unit, on a 240V single-phase supply, with a maximum pipe length of 30m and a maximum height difference of 20m.
Coalfields Climate Control supplies and installs this unit throughout Singleton and the Hunter Valley. A site assessment before quoting confirms room sizing, unit placement, pipe route, condensate drainage and electrical capacity.
What supply and install through us covers:
– Manufacturer-approved installation by qualified technicians, so the warranty is not compromised by a non-compliant install
– A lifetime guarantee of workmanship on the installation itself
– A 10-day install guarantee on split system installations in Singleton
– Drop sheets laid before work starts, mess cleaned up afterwards, and a walkthrough of how to operate the system
The most common problem we are called out to fix is not a faulty unit — it is an installation issue: undersized selection, poor outdoor unit placement, or drainage that was never set up properly. Getting the supply and the install from one local team means one number to call if anything is not right.
To arrange a site assessment and quote, call 0422 493 102.
Warranty Information
▾Daikin provides a 5-year parts and labour warranty on split systems professionally installed in domestic premises in Australia.
That warranty depends on the installation being carried out correctly by a qualified installer, and on normal use and maintenance. A DIY or unlicensed install is the fastest way to void it — and handling refrigerant without a licence is an offence in Australia regardless of the warranty position.
Coalfields Climate Control installs to manufacturer specification and is manufacturer-approved for full warranty servicing across all major brands, so ongoing servicing can be handled locally rather than through a metropolitan agent. Our own workmanship carries a lifetime guarantee on top of the product warranty.
Warranty coverage depends on correct installation, normal use, maintenance requirements and the manufacturer current warranty terms.
Frequently Asked Questions
▾What room size does the FTXM95WVMA suit?
It suits spaces of roughly 60 to 80 m2. That is a starting point, not a final answer -- ceiling height, insulation, window area and west-facing glazing all shift it. We size on site before quoting, and will recommend a different capacity if the room needs one.
How quiet is it?
Indoor sound pressure ranges from 33 dB(A) on the quiet setting to 51 dB(A) at high fan speed. The quiet figure is the one that matters for bedrooms and living areas used in the evening.
How much does supply and installation cost in Singleton?
It depends on the pipe run, wall construction, outdoor unit placement and whether the electrical supply needs work, so we quote after a site assessment rather than giving a headline figure that changes later. Call 0422 493 102 to book one.
Does it include Wi-Fi control?
Yes. Wi-Fi is built into the indoor unit on the XL Premium range, so app control and scheduling work without an extra adaptor. This is a genuine difference from the Cora range, which needs an optional wireless adaptor fitted.
Can it replace my existing split system and reuse the pipework?
Often yes, provided the existing run is within the 30m maximum length and 20m height difference and the pipework is sound. We check this during the site assessment -- reusing serviceable pipework keeps the cost down where it is appropriate.
How efficient is it to run?
It is rated at 3.39 EER for cooling and 3.32 COP for heating. In practice that means roughly 3.39kW of cooling for every kilowatt of electricity drawn. Paired with rooftop solar, daytime summer running costs in Singleton are low.